320A Brush ESC

Method of purchase https://item.taobao.com/item.htm?spm=a1z10.3-c.w4002-10058254375.11.aXoXBo&id=20921024523

320A Brush ESC:
Bidirectional power transfer without brakes, handle up, the motor is transferred forward, handle gyrus, natural speed stop. The handle down, reverse the motor backwards, handle gyrus, natural speed stop. In the forward travel state to stop or reverse, the handle down, ESC reverse backwards; To stop, just when the motor is reversed, the handle gyrus, travel stops.
Learning center:
1. Connect the power supply, connect the motor after the receiver plugged DO have a voice at this time represents the normal electrical power transfer
2. If the center position, the motor immediately issued DO BE MI. If not in the center position, the motor will emit sound raw DO .DO ....
Prompt the user until the user Mediation to center position, DO sound stops immediately issued DO BE MI. E-learning center can complete the work.
3.LED state, the remote control at the center position, LED off, current-forward or backward when, LED full brightness, LED A blinking when no signal.
Battery support: nickel-metal hydride and nickel cadmium 7-12 group (8.4V ~ 16V); lithium battery 3 to 4 groups (11.1 ~ 14.8V)
Current parameters: forward 320A, backward 160A, brakes 250A,
BEC Output: Voltage 5.6V, current 2A. (Receiver supply, power steering)
Dimensions: L47mm, W34mm, H32mm (containing the heat sink)

Instructions:
1, the right and the power supply battery connectors on both ends of the wiring board red line is positive, black, compared with a negative electrode. (Standard DC battery or connection plug Daejeon male plug / banana plug)

2, ESC output lines are connected red and black red and black motor car 550/560/580 line.
3, open the electric power transfer switches, motor issued a "beep" sound, and then turn on the transmitter power, the motor will issue a "microphone duo friends ~ ~" sound proof remote control signal has been successfully connected and ESC.